NEWS
How to improve the operating efficiency of the servo hydraulic machine?
Publication Time:
2019-03-05 00:00
Source:
In the production and use of servo hydraulic press, in addition to pay attention to the specification and punctual repair and maintenance during operation, we must find ways to improve the operating efficiency of the servo hydraulic press. How to improve it? Let's briefly introduce a few points:
First, the operator of the servo hydraulic machine should understand the principle of the hydraulic system, understand the effect of the primary hydraulic components of the equipment, and grasp the order of operation of the system. Before starting the equipment, check whether all the moving tissues and solenoid valves are in the initial state, check the fuel tank oil level. If abnormality is found or the oil quantity is lacking, the hydraulic pump motor should be prohibited from being fired and repaired by the repairman. Operators should always check the working conditions of the hydraulic system, observe the working pressure and speed, and check the workpiece scale and prop wear condition to ensure the hydraulic system works safely and securely.
Second, winter When the fuel tank oil temperature does not reach 25 °C, the executive organization can not start to work in order, but can only start the hydraulic pump motor to make the hydraulic pump empty. During the summer operation, when the oil temperature in the fuel tank is higher than 60 °C, pay attention to the investigation of the hydraulic system operation and tell the repairer to handle it. The operator cannot damage the interlocking equipment of the electrical system. The electric control valve cannot be pushed by hand, and the orientation of each operating gear cannot be damaged or moved.
Third, the hydraulic machine equipment that has been shut down for more than 4 hours, before starting the operation, the hydraulic pump motor should be started for 5-10 minutes before the pressure can be operated. When there is a problem with the hydraulic system, the operator cannot arbitrarily move, and the repair part should be reported immediately. Hydraulic equipment should always be cleaned to prevent dust, cutting fluid, cutting, cotton yarn and other debris from entering the tank.
Related News
Welcome to Zhejiang Hangduan Precision Machine Co., Ltd.
Established in 1985, Zhejiang Hangdang Precision Machinery Co., Ltd. has a history of more than 30 years. It is a key enterprise specializing in the production of forging machine tools in Zhejiang Province. The company is located in Puyang Industrial Park, Xiaoshan, Hangzhou. The geographical position is superior and the transportation is convenient. It covers an area of about 20,000 square meters, with a construction area of about 15,000 square meters and more than 200 employees. The registered "Hangteng" trademark presses have 10 series, 76 6.3T-400T different models, and also produce various special specifications presses according to user requirements. The products cover 16 provinces (municipalities) and regions in the country, good Pre-sales guidance and after-sales service, enjoy high honors among users.
Hydraulic machine shaking tricks to solve the problem? Let us answer
Hydraulic machine shaking tricks to solve the problem? Let us answer
How to improve the operating efficiency of the servo hydraulic machine?
In the production and use of servo hydraulic press, in addition to pay attention to the specification and punctual repair and maintenance during operation, we must find ways to improve the operating efficiency of the servo hydraulic press. How to improve it? Let's briefly introduce a few points:
Contact Information
Mobile
Contact Information
Tel: +86-571-82411868
Mobile: +86-15382346088
Fax: +86-571-82411881
E-mail: 440087925@qq.com
Address: Puyang Industrial Zone, Xiaoshan District, Hangzhou, Zhejiang Province
Copyright © 2019 Zhejiang Hangduan Precision Machine Co., Ltd. All rights reserved